Tactical Command
http://www.tacticalwargames.net/taccmd/

My Necrons (mostly Newcrons!) gallery thread
http://www.tacticalwargames.net/taccmd/viewtopic.php?f=7&t=34254		 Page 1 of 2
Author:  Darios [ Sun May 03, 2020 1:55 pm ]
Post subject:  My Necrons (mostly Newcrons!) gallery thread
Hi all,
i started collecting this little army some time ago (when i acidentally stumbled over the lovely minis from "Trolls under the Bridge" on some Convention i attended. Firstly stared out as just a collec and paint fun thingie, it turned into an actual useable army.

So far i managed to paint all my Infantry, and most of y AVs to date... next up will be 4 more Doomsdayarks and 6 Ghost Arks, then i am done with all i have up to now... more is already on the way (mosly 3d printed stuff like the Warengines) enjoy!

Attachment:
ArmyshotMay.jpg
ArmyshotMay.jpg [ 715.69 KiB | Viewed 4631 times ]

Attachment:
NecronDetail1.jpg
NecronDetail1.jpg [ 713.74 KiB | Viewed 4631 times ]

Attachment:
GroupDetail2.jpg
GroupDetail2.jpg [ 733.18 KiB | Viewed 4631 times ]

Attachment:
GroupDetail3.jpg
GroupDetail3.jpg [ 761.92 KiB | Viewed 4631 times ]

Attachment:
GroupDetail4.jpg
GroupDetail4.jpg [ 743.87 KiB | Viewed 4631 times ]
Author:  Darios [ Sun May 03, 2020 1:58 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
and the last pics (had to make a separte post because of the 5 attachments limit)
Attachment:
GroupDetail5.jpg
GroupDetail5.jpg [ 699.51 KiB | Viewed 4630 times ]

Attachment:
Groupdetail6.jpg
Groupdetail6.jpg [ 718.64 KiB | Viewed 4630 times ]
Author:  elsmore01 [ Sun May 03, 2020 5:49 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
That's a nice looking army!
Author:  Rastamann_The_Returned [ Sun May 03, 2020 6:20 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
I like it - great looking force
Author:  Darios [ Sun May 03, 2020 8:54 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Thanks guys! I try to keep the motivation Momentum and to tackle the whole 10 Arks business... but man do i hate painting those... ^^
Author:  Deb [ Tue May 05, 2020 1:46 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
very nice. Are you using the Seutekh list for your army?

I have a really nice Necron Army myself

https://www.tacticalwargames.net/taccmd ... 8&start=15

I went for the Nihilakh Dynasty colour scheme, as I wanted my army to jump out at you from the table in a tournament.

I would like to see a whole heap of people build various dynasties and post their armies up here.
Author:  Darios [ Tue May 05, 2020 5:56 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Deb wrote:
very nice. Are you using the Seutekh list for your army?

I have a really nice Necron Army myself

https://www.tacticalwargames.net/taccmd ... 8&start=15

I went for the Nihilakh Dynasty colour scheme, as I wanted my army to jump out at you from the table in a tournament.

I would like to see a whole heap of people build various dynasties and post their armies up here.


Yeah right now i mostly play them as Sautekh. But since the Tomb Worlds list got revived i am probably switching soon as i am waiting for a Seraptekh Heavy Construct ^^
Author:  Deb [ Tue May 05, 2020 7:13 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
A lot of my armies vehicles and super heavies are 3D printed. Do you have a 3D printer?

I have STL files for most of the Sautekh Army (most but not all). A bout 50% of it is Trolls , and he has a great collection of proxies. He is planning a lot of new releases like the command barge, and others. He does really nice prints, and I found that saves me time, and the problem that a percentage of my 3D prints did not print out correctly. He takes care of quality control, and can have the ones that are not perfect remade with the pewter of the bad ones. You can not do that with resin or PLA.

Also if you have a Resin printer, you have to clean it all up, and print it in an area that is aerated.

But I found that the 3D prints are good for the models, you can not get elsewhere.
Author:  Darios [ Tue May 05, 2020 10:07 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Deb wrote:
A lot of my armies vehicles and super heavies are 3D printed. Do you have a 3D printer?

I have STL files for most of the Sautekh Army (most but not all). A bout 50% of it is Trolls , and he has a great collection of proxies. He is planning a lot of new releases like the command barge, and others. He does really nice prints, and I found that saves me time, and the problem that a percentage of my 3D prints did not print out correctly. He takes care of quality control, and can have the ones that are not perfect remade with the pewter of the bad ones. You can not do that with resin or PLA.

Also if you have a Resin printer, you have to clean it all up, and print it in an area that is aerated.

But I found that the 3D prints are good for the models, you can not get elsewhere.


yeah i know the trolls and actually assist them in evoving the necron line since a while... ;-) I also prefer metal/plastic to 3d resin at the scale if possible... and no i do not own a printer, i have a friend doing stuff for me from time to time if needed ^^
Author:  Darios [ Sun Oct 11, 2020 8:52 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
as for the aforeentionend 3d prints... here are some reinforcements straight from 3DPrintia:

Aeonic Orb
Attachment:
Aeonic1.jpg
Aeonic1.jpg [ 687.31 KiB | Viewed 3946 times ]


Pylons
Attachment:
Pylons1.jpg
Pylons1.jpg [ 613.36 KiB | Viewed 3946 times ]


Obelisks
Attachment:
Obelisks2.jpg
Obelisks2.jpg [ 572.92 KiB | Viewed 3946 times ]


hope you enjoy!
Author:  atension [ Mon Oct 12, 2020 3:51 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Those a great!
Author:  Deb [ Sat Oct 17, 2020 3:38 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Trolls have announced that they will soon be releasing a proxy for the Monolith. Photos of it are on their facebook page.
Author:  Darios [ Sun Oct 18, 2020 10:29 am ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Deb wrote:
Trolls have announced that they will soon be releasing a proxy for the Monolith. Photos of it are on their facebook page.


yeah been waiting for this for a while now... talked to them about it around April ;-)
Author:  Pacific [ Fri Oct 23, 2020 3:00 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Wow very nice, that's an impressive looking force.

I like the glowing green effect on the Aenoic orbs, works very well.
Author:  Stormwind [ Sat Oct 31, 2020 2:54 pm ]
Post subject:  Re: My Necrons (mostly Newcrons!) gallery thread
Wonderful work!
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/