Myself and armand decided to do a joint venture of working on 3d designing and printing a flying base with dials and altitude and speed on it. We made some changes from current style of bases to some things we thought would be user friendly and add just that little extra. First thing we added which isn't much but is a nameplate at the rear of the base. You now have a section to write your pilots name on or you can mark the planes kills as it progresses to becoming an ace. Having used flight stands before i know the pain of the fragile connection point to the miniature and having the peg snap, magnetizing is the way to go to keep your flight stands viable and not worry about your miniatures being glued back onto them. We decided to create a flight stand cup, it slots on the top of the flight stand and can be glued to it. We have made 2 sizes, both are 2mm deep, 1 is 3mm wide the other is 5mm wide so you can slot a magnet into it flush.
Blind-